Ratoc Systems FR-DK2 Manuel d'utilisateur télécharger pdf (Page 4)

2. Setting

This chapter explains how to set up FireDock series before you use it.

-How to attach a 3.5 inch HDD to FireDock series(Chapter 2-1, 2-2)

-How to install Storage Supplement for Windows 98SE users(Chapter 2-3)

-How to install FRDKDOWN bug fix utility for Windows Me users(Chapter 2-4)

-How to install utility for MacOS 9.1/9.0.4 users(Chapter 2-5)

-How to install FireWire driver software for MacOS 9.0.4 users(Chapter 2-5)

2-1.Attaching a HDD to FireDock series

Here is an explanation of how to attach a HDD to the FR-DK1. Follow the

same procedure for the FR-DK2, FR-MDK1.

(2)Slide cover off the HD case and connect power and data cable to the HDD.

Mount the HDD in the HD case with the screws provided.

(NOTE)You have to set [MASTER] position in HDD jumper setting. If

you have a Western Digital HDD, set [SINGLE] position in HDD

jumper setting. For more information, refer to its manual.

(3)Reinstall cover on the HD case and push the HD case into the removable

case.

(4)Lower handle and use the provided lock key to lock the HD case. If you don’t

lock it, FireDock won’t work. If you lock the HD case, the POWER

LED(GREEN) will come on when it is powered.

(1)Turn the key switch to the UNLOCKED POSITION. Then, lift handle to

release the HD case from the removable case and pull out.

Key switch

Power switch

Screws

Power cable and data cable

Handle

Power LED

Access LED

Cover

HD case

Removable case

Handle

1 2 3 4 5 6 7 8 9 ... 20 21

Pas de commentaire

Ratoc Systems FR-DK2 Manuel d'utilisateur Page 4